The Von Duprin EPT10 is a highly advanced and reliable exit device that provides secure and easy exit solutions for buildings. As a critical component of a building's safety and security system, proper installation is crucial to ensure that the device functions correctly and efficiently. In this article, we will provide a comprehensive guide on how to install the Von Duprin EPT10, including the necessary tools, materials, and step-by-step instructions.
Understanding the Von Duprin EPT10
Before we dive into the installation process, it's essential to understand the components and features of the Von Duprin EPT10. The device consists of a push bar, latch, strike, and mounting screws. It's designed to be compatible with various door types and sizes, including single and double doors.
Pre-Installation Checklist
Pre-Installation Checklist
Before starting the installation process, ensure that you have the following:
- Von Duprin EPT10 device
- Door and frame assembly
- Measuring tape
- Drill and bits
- Screwdriver
- Allen wrench
- Safety glasses
- Work light (optional)
It's also essential to review the local building codes and regulations to ensure that the installation meets the required standards.
Step 1: Measure and Mark the Door
Step 1: Measure and Mark the Door
Measure the door width and mark the center point on the door. This will serve as a reference point for installing the push bar.
- Measure the door width from the hinge side to the lock side.
- Mark the center point on the door using a pencil or marker.
Step 2: Install the Latch
Step 2: Install the Latch
Install the latch on the door frame, ensuring that it's aligned with the mark made in Step 1.
- Hold the latch against the door frame and mark the screw holes.
- Drill pilot holes for the screws.
- Install the screws and tighten them securely.
Step 3: Install the Strike
Step 3: Install the Strike
Install the strike on the door frame, ensuring that it's aligned with the latch.
- Hold the strike against the door frame and mark the screw holes.
- Drill pilot holes for the screws.
- Install the screws and tighten them securely.
Step 4: Install the Push Bar
Step 4: Install the Push Bar
Install the push bar on the door, ensuring that it's aligned with the mark made in Step 1.
- Hold the push bar against the door and mark the screw holes.
- Drill pilot holes for the screws.
- Install the screws and tighten them securely.
Step 5: Connect the Latch and Strike
Step 5: Connect the Latch and Strike
Connect the latch and strike, ensuring that they're securely attached.
- Hold the latch and strike together and mark the screw holes.
- Drill pilot holes for the screws.
- Install the screws and tighten them securely.
Step 6: Test the Device
Step 6: Test the Device
Test the device to ensure that it's functioning correctly.
- Push the push bar to ensure that it's engaging the latch correctly.
- Pull the push bar to ensure that it's releasing the latch correctly.
Troubleshooting Tips
Troubleshooting Tips
If you encounter any issues during the installation process, refer to the troubleshooting tips below:
- Ensure that the device is installed correctly and that all screws are tightened securely.
- Check for any obstructions or blockages that may be preventing the device from functioning correctly.
- Consult the user manual or contact a professional if you're unsure about any aspect of the installation process.
Conclusion and Final Check
Conclusion and Final Check
Congratulations! You have successfully installed the Von Duprin EPT10 exit device. Perform a final check to ensure that the device is functioning correctly and that all screws are tightened securely.
- Test the device to ensure that it's engaging and releasing the latch correctly.
- Check for any signs of wear or damage.
- Consult the user manual or contact a professional if you're unsure about any aspect of the installation process.
What is the Von Duprin EPT10?
+The Von Duprin EPT10 is a highly advanced and reliable exit device that provides secure and easy exit solutions for buildings.
What are the components of the Von Duprin EPT10?
+The Von Duprin EPT10 consists of a push bar, latch, strike, and mounting screws.
What are the benefits of using the Von Duprin EPT10?
+The Von Duprin EPT10 provides secure and easy exit solutions for buildings, ensuring that occupants can exit quickly and safely in the event of an emergency.
We hope this article has provided you with a comprehensive guide on how to install the Von Duprin EPT10 exit device. If you have any questions or comments, please feel free to share them below.